HP rx3400 Buttons, Stylus, Audio, Indicators Charge and Notify, Bluetooth and Wlan, USB Client

QuickSpecs

HP iPAQ rx3400 series Mobile Media Companion

Standard Features

Hardware Buttons/Reset	One power button, one reset button, four software programmable application buttons, one 5-way
Buttons	navigation controller touchpad, one voice record/image capture button.
Stylus	One
Audio	Integrated microphone, speaker and one 3.5 mm stereo headphone jack, MP3 stereo through
	headphone jack
Indicators	Charge and Notify	Blinking green – notification
		Blinking amber – charging
		Solid amber – full charge
	Bluetooth and WLAN	Solid blue LED – radio ON
Cradle Interfaces	Universal Connector	1 – 22 pin connector for synchronization and charging
Other interfaces	IrDA	Supported (Serial IR/Consumer IR)
	USB Client	Supported via cradle interface
	Serial	RS232 supported via cradle interface
	Sync/Data Connector	USB 1.1 client
SD Slot	Support 4-bit SDIO and 4-bit SD/MMC type memory standard. SDIO Now! driver included.
Power Supply	Battery	Removable/Rechargeable 920 mAh Lithium-lon user replaceable battery.
		Optional extended 1440 and 2880 mAh Lithium-lon batteries available for
		purchase (http://www.hp.com/go/ipaqaccessories)
		Estimated usage time of fully charged battery is up to 9 hours. Charging time
		up to 1.5 hours.
	AC Power	AC Input: 100~240 Vac, 50/60 Hz, AC Input current: 0.2 Aac max
		Output Voltage: 5Vdc (typical), Output Current: 2A (typical)
	NOTE: Battery run time varies based on the usage pattern of an individual user and the configuration of
	the handheld. Use of internal wireless capabilities and backlight will significantly decrease battery run
	time.
AC Adapter	Dimensions (H x W xD)	3 x 1.9 x 1.8 in (76 x 48 x 44 mm – including prongs), (may vary by model)
	Cord Length (approx.)	6 ft (1.83 m)
	Power Supply Ratings	Voltage Range	100 to 240 V Switching
		Input Current	0.3 Aac
		Input Frequency	50 to 60 Hz
		Output Voltage	5 VDC
		Output Current	2 Amp

DA - 11959 Worldwide — Version 4 — May 19, 2005 Page 5