3Push and hold the Connect button (B) on the underside of the mouse until the blue LED on the receiver stops flashing.

NOTE: The receiver connection session times out after 60 seconds. To ensure the connection was established instead of the receiver timing out, move the mouse and check for response.

After the mouse connection is established, repeat the procedure with the keyboard:

1Push the Connect button on the receiver, and hold it for 5 to 10 seconds until the blue light starts to flash.

2Push and hold the Connect button (C) on the underside of the keyboard until the blue LED on the receiver stops flashing.

For additional mouse and keyboard troubleshooting tips, refer to the Troubleshooting and Maintenance Guide.

Using the Keyboard 27