Modifying the movie

After you have created the movie, muvee autoProducer enables you to make some quick final changes to the project before you save it. You can also have muvee autoProducer replace pictures or videos with other similar or contrasting ones. Alternatively, you can manually choose the replacement shots.

To modify a movie:

1 Click the tweak muvee button. The Tweak muvee window opens.

2Click the Start Playback button. The movie starts playing.

3Click the Pause Playback button to stop the movie at any time.

4You can also click on the seek bar or drag the slider to move to a particular point in the movie.

5Use the controls in the Tweak muvee window to modify the movie project:

NOTE: In the Tweak muvee window, you can replace a video segment only with another video segment from the original footage; likewise you can replace pictures only with other pictures. You cannot expand the duration of the selected clip or the replacement clip.

￿Click the Auto-replace with similar button to automatically replace a picture or video segment with another similar picture or video segment.

￿Click the Auto-replace with different button to automatically replace a picture or video segment with a completely different picture or video segment.

￿Click the Manually replace the selected segment button to replace a picture or video segment with a picture or video segment of your choice.

￿Click the Start recording voiceover button to record your voice-over content. When you are finished recording, click the Stop recording voiceover button.

￿You can click the Remove voiceover button to delete voice from a segment of the movie.

￿Click the Undo or Redo button as needed.

6When you are done modifying the movie project, click OK to save the changes and close the Tweak muvee window.

Or

To close the Tweak muvee window without saving the changes, click Cancel.

7Click the make muvee button to save the changes to the movie.

174Getting Started (features vary by model)