![](/images/new-backgrounds/1330249/3302499x1.webp)
Setting the Date & Time
1
2
Turn the power on, and set the camera to the Setup Menu.
Select [Date & Time].
Press or
to select [Date & Time] then press SET button to launch the submenu.
3
4
Set date and time.
Press or
to change the value of the cursor located. Press
or
button to move the cursor between settings.
Apply the setting.
After adjusting the settings, press the OK or the MENU button to apply the setting.
Caution
Once the date, time and language have been set, changing the batteries or removing
the SD card will NOT reset these settings. However, if the batteries are removed for longer than 48 hours, the Date and Time will need to be
3