•PCIe bus current (average, maximum)

•PCIe bus power (average, maximum)

•PCIe power limit threshold (watts)

•PCIe slot available power (watts)

•PCIe negotiated link information (lanes and throughput) Block device information:

•Manufacturer's code

•Manufacturing date

•Vendor and sub-vendor information

•Format status and sector information (if device is attached)

•FPGA ID and Low-level format GUID

•PCIe slot available power

•PCIe negotiated link information

•Card temperature, in degrees Centigrade

•Internal voltage, average and maximum.

•Auxiliary voltage: average and maximum.

•Percentage of good blocks, data and metadata

•Lifetime data volume statistics

•RAM usage

Error mode information: If the IO Accelerator is in minimal mode, read-only mode, or write-reduced mode when fio-statusis run, the following differences occur in the output:

•Attach status is Status unknown: Driver is in MINIMAL MODE:

•The reason for the minimal mode state appears (for example, Firmware is out of date. Update firmware.)

•"Geometry and capacity information not available." is displayed.

•No media health information appears.

fio-sure-erase

CAUTION: Do not use this utility if there are any IO Accelerator devices installed in the system that are not selected to be cleared or purged of data.

•Ensure that you back up any data prior to activation of this utility.

•Remove any devices that are not targeted for purge.

•After the data is removed from the target devices, it is purged.

•There is no recovery to this action.

Utilities 47