![](/images/new-backgrounds/1213245/21324593x1.webp)
b.Remove the two Phillips PM2.0×3.0 screws (2) that secure the bezel to the display assembly.
NOTE: The screw covers may be difficult to remove. If you need to replace the covers, they are available in the Rubber Kit, spare part number
c.Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge (3) of the display bezel until the bezel disengages from the display back cover.
d.Remove the display bezel (4).
The display bezel is available using spare part number
7.If it is necessary to replace the webcam/microphone module:
a. Disconnect the webcam/microphone module cable (1) from the module.