![](/images/new-backgrounds/1213245/213245109x1.webp)
c.Remove the cable from the clips on the side of the display panel (4), and then remove the display cable from the display (5).
The display panel cable includes the webcam/microphone module cable and is available using the following spare part numbers:
10.If it is necessary to replace the WLAN antenna cable and transceiver:
a.Detach the antenna transceivers (1) from the display back cover. (The transceivers are attached to the display back cover with
b.Release the shielding tape (2) that secures the antenna cables to the display back cover.
c.Release the antenna cables from the retention clips (2) and channel built into the top edge and right side of the display back cover.
The antenna cables and transceivers are included in the WLAN Antenna Kit, spare part number