h

SAN Manager LM 1.2 for Windows NT

Release Notes

New In This Release

SOFTWARE COMPATIBILITY

SAN Manager LM is compatible with Windows NT 4.0 with Service Pack 4 or later. However, due to the limitations discussed in the first paragraph under Known Issues on page 3, HP recommends Service Pack 6a.

HARDWARE COMPATIBILITY

With the release of version 1.2, SAN Manager LM now supports the following hardware:

RAIDs

–EMC Symmetrix 3000 Devices (SCSI)

–HP SureStore E Disk Array XP256 (SCSI)

Note

EMC Symmetrix 3000 (SCSI) devices and XP256 (SCSI) devices are only compatible

 

with SAN Manager LM when they are configured with a Crossroads bridge and

 

QLogic HBAs.

 

 

– HP SureStore E Disk System FC60 with version 7.02.27.01 or later of the RDAC driver

QUALIFIED HBAS

The following HBAs are the only HBAs that are qualified for use with SAN Manager LM on Windows NT hosts:

– QLogic QLA2100 and QLA2200 with the HP SAN Manager LM QLogic HBA driver

Note For an up-to-date list of the HBAs and drivers that are qualified for use with SAN Manager LM, visit HP’s Customer Care website. For more information about the Customer Care website, see the Obtaining Free HP Product Information document that is included in your SAN Manager LM box.

J6100-96021 SAN Manager LM Release Notes

Page 1 of 7