Getting Started
Adapter charging mode
PC USB charging mode
Step 1 :
Load the Battery
•Slide the latch and open the battery cover.
•Insert the battery correspondingly with the correct polarity marks (+ or
•Close the battery cover firmly so that it locks into place.
Step 2 :
Charge the
•Charge the battery fully before first use.
•Under charging, the indicator will flash.
•It could take up to 5 hours to charge fully with an adapter. Once complete, the indicator will turn off automatically.
Note:
• A longer time is required via a PC USB.
Step 3 :
Insert the Memory Card
•Slide the latch and open the battery cover.
•Insert the SD card into the slot until it locks properly.
•To remove the SD card, press inward to release it and gently pull it out.
Englis
3