English
5. Troubleshooting
The camera is in DC power mode.
In flash auto mode, camera flash fires ONLY when necessary (in dark setting as example).
The “!” means the SD card is low speed or contains incompatible content. The way to resolve this condition is to format SD card by the camera instead of a PC (Please refer to the detailed Format instruction in Section 5).
Or upgrade to a higher speed performance SD/SDHC/SDXC card to a high speed one.
The camera extends photo exposure time under low light/ indoor condition. Keep the camera (and the target subject) steady for several seconds when taking photo.
The quickest and preferred method is to use the supplied AC adaptor with the USB cable (See page 8 in this manual for details). You can use the supplied UB cable with a PC or laptop to recharge as well. Please note that if you use a laptop, please make sure it is plugged into an AC source so that it’s battery is not depleted. The camera must be turned OFF; blinking light confirms charging, and the light becomes constant after the charging is completed.
In AC charging Mode, the light will turn itself off automatically after 3~5 minutes.
The full charge time is about 4 to 5 hours. (Actual charging time may vary depending on the condition of the battery.)
a. The disk [DV] shows the internal memory of the camera.
(The disk label may be different according to different model and PC OS.)
b. [Removable Disk] shows the external memory.
(Under the circumstances of within the SD/SDHC/SDXC card in the camera)
c. The disk [DVAP] shows the
otherwise, the Internet Direct application can not function.
Review the Getting Help section of the User manual for a list of phone numbers and
