Hardware upgrades
3.Verify the location of the round opening on the flash memory card and align the opening with the plastic stem on the system board.
4.Insert the new flash memory with the connectors facing down as shown in the following illustration.
Installing flash memory
5.Complete steps 6 through 8 of the “General hardware installation sequence” on page
6.Install the thin client software. For installation instructions, refer to the Troubleshooting Guide or the HP Compaq Thin Client
Imaging Tool white paper available on the HP Web site at www.hp.com/products/thinclientsoftware.
Hardware Reference Guide | www.hp.com |