HP tc4200 Security1 Sub-channels, Media Access Protocol, Network Architecture, Models, Roaming

Security1

Sub-channels

DBPSK, DQPSK, CCK, OFDM

Supports 64- and 128-bit WEP, WPA, WPA2, hardware-accelera AES, 802.1x authentication types EAP-TLS, EAP-TTLS, PEAP-G PEAP-MSCHAPv2, LEAP, EAP-FAST.

Support for Cisco Security Features (proven compatibility with Ci Aironet infrastructure products through the Cisco Compatible Extensions Program).

Multinational support with frequency bands and channels compli local regulations.

Media Access Protocol	CSMA/CA (Collision Avoidance) with ACK
Network Architecture	Ad-hoc (Peer to Peer)
Models	Infrastructure (Access Point Required)
Roaming	IEEE 802.11 compliant roaming between access points.
Output Power (for CKK)	16 dBm +/- 2 dB
2

Output Power (for OFDM; power varies by

data rate)2

Power Consumption

Power Management

Receiver Sensitivity3 Antenna type

Range

Form Factor

Weight

Dimensions

Operating Voltage

Temperature

Humidity

Altitude

15 dBm +2/-5 dB

Transmit: 1.8 Watts (max)

Receive: 1.4 Watts (max)

Idle mode: 75 mW (nominal)

Sleep mode: 60 mW

ACPI compliant power management

802.11 Compliant Power Saving Mode

54 Mbps: -72 dBm, 11 Mbps: -88 dBm , 1 Mbps: -97 dBm

High efficiency dual band antenna with polarization diversity, mo in the display enclosure

802.11 b – Typical	1200 feet – Outdoor Open Area
(@1 Mbps)	300 feet – Indoor, Office environment
802.11 g – Typical	1200 feet – Outdoor Open Area
(@1 Mbps)	300 feet – Indoor, Office environment
MiniPCI Type IIIB
0.026 lb (11.75 g) (max)

0.20x 1.75 x 2.34 in (4.9 x 44.6 x 59.8 mm)

3.3v

Operating	32° to 158° F (0° to 70° C)
Non-operating	-40° to 176° F (-40° to 80° C)
Operating	10% to 90% (non-condensing)
Non-operating	5% to 95% (non-condensing)
Operating	0 to 10,000 ft (3,048 m)
Non-operating	0 to 50,000 ft (15,240 m)

Configuration Utility4 Choice of Configuration Utility:

zIntel PROSet for Microsoft Windows 2000 or XP (required Cisco Compatible Extensions support)

zMicrosoft Windows XP Wireless Network Connection Man

1.Check latest software/driver release for updates on supported security features.

2.Maximum output power may vary by country according to local regulations.

3.Receiver sensitivity is measured at a packet error rate of 8% for 802.11b (CKK modu and a packet error rate of 10% for 802.11a/g (OFDM modulation).

4.WLAN supplier's client utility is required for Cisco Compatible Extensions support. W may also be compatible with certain third-party software supplicants.