Maintenance
Maintenance and shipping guidelines
This section covers maintenance and shipping guidelines for your TFT7600 RKM.
To protect your unit from overheating and other types of damage:
•Use only a power source and connection appropriate for this unit, as indicated on the marking label and back plate.
•If an extension cord or power strip is used, be sure that the cord or strip is rated for the product. Also, be sure that the total ampere ratings of all products plugged into the extension cord or power strip do not exceed 80 percent of the extension cord or power strip ampere ratings limit.
•Do not overload an electrical outlet, power strip, or convenience receptacle. The overall system load must not exceed 80 percent of the branch circuit rating. If power strips are used, the load should not exceed 80 percent of the power strip input rating.
•Install the unit near an outlet that you can reach easily. Disconnect the unit by grasping the plug firmly and pulling it from the outlet. Never disconnect the plug by pulling the cord.
•Disconnect the unit from the wall before cleaning. Do not use liquid cleaners or aerosol cleaners.
•Slots and openings in the monitor are provided for ventilation. These openings must not be blocked or covered. Never push objects of any kind into these slots or openings.
•Do not drop the unit or place it on an unstable surface.
•Do not allow anything to rest on the power cord. Do not walk on the cord.
•Keep the unit in a
•Do not attempt to service this product yourself. Adjust only those controls that are covered by the operating instructions. If the unit is not operating properly or has been dropped or damaged, contact your HP authorized dealer, reseller, or service provider.
Cleaning the monitor
To clean the display:
1.Turn off and unplug the unit.
2.Dust the panel by wiping the screen with a soft, clean cloth.
If the screen requires additional cleaning, use any
CAUTION: Do not use benzene, thinner, ammonia, or any volatile substance to clean the monitor screen or cabinet. These chemicals might damage the monitor. Never use water to clean an LCD screen.
Maintenance 19
