2025 Flat Panel Display
Removing the Monitor Base
Before you can mount the monitor onto a swing arm or other mounting fixture, you must remove the monitor from the base.
ÄCAUTION: Before beginning to disassemble the monitor, be sure the monitor is turned off and the power and signal cables are both disconnected.
To remove the monitor from the base:
ÄCAUTION: Lay the front bezel down on a soft area to prevent it from getting scratched, defaced, or broken.
ÅWARNING: Before removing the monitor from the base, ensure that the monitor is lying flat, front bezel down, and that the base is set to the maximum base extension. Attempting to remove the monitor from the base while upright in the minimum base extension may result in injury to the user.
1.Disconnect and remove the signal and power cables from the back of the monitor.
User’s Guide | 7 |
