HP UX IPSec Software Step 3: Adding a Rule

Figure 1 IP Security Policy Wizard

6.The Policy Wizard opens the Completing the IP Security policy wizard window. Select the Edit properties check box if it is not already selected.

Click Finish.

The IP Security configuration utility opens the Policy Properties dialog box. The title of the window will be name Policy, where name is the policy name.

Step 3: Adding a Rule

The primary purpose of a rule is to assign actions to filters. A rule also specifies IKE authentication methods. Use the following procedure to add a rule to the IP Security policy:

1.Select the Rules tab in the Policy Properties dialog box.

Clear the Use Add Wizard box check box if it is selected (Figure 2). Click Add.

16