DRD use case
Updating fromPatches
| |
|
|
Active |
|
1.Create a clone of the original system image (drd clone)
2.Run
3.Adjust file system sizes on the clone as needed
4.Activate the clone & boot when ready (drd activate)
5.Update the active image to
6.When update completes, have an active image with 11i v3 1103, and a clone with 11i v2 (drd status)
Could stop here, OR…
1.Create a clone of the active image (drd clone
2.Use SWA to identify patches & fixes to security issues (drd mount, swa report, drd unmount)
3.Install required patches
(swa get, drd runcmd swinstall)
4.Boot the clone when ready (drd activate)
19