DRD use case
Maintenance (slide 2 of 3)Active
Apply patches & products
sync
Modified clone
1.Original system image is active
2.Create a clone of the original system image (drd clone)
3.When complete, two copies of system image exist (drd status)
4.Modify inactive image to reach desired state
– install patches & products | (drd runcmd |
swinstall) |
|
5.When modification completes, have an unmodified original image and a modified clone
6.Synchronize files from the active image to the clone – password files, log files, etc. (drd sync)
7
The orange lightning bolt identifies increased feature support for 11i v3; in this case, product installation on a clone is supported only on 11i v3, with patch installation supported on 11i v3 and 11i v2