HP V2001XX, V2110US, V2107AP, V2105AP Initiating or Resuming from Standby, Task Procedure Result

Power

Initiating or Resuming from Standby

Task	Procedure	Result
Initiate standby.	With the notebook on, use any of	■ Power/standby
	the following procedures:	lights blink.
	■ Press the fn+f5 hotkey.	■ Screen is cleared.
	■ Close the notebook.

✎When the notebook is closed, the display presses the display switch, which then initiates standby.

■In Windows XP Home, select Start > Turn Off Computer > Stand By.*

■In Windows XP Professional, select Start > Turn Off Computer > Stand by > OK.* (If Stand by is not displayed, press the down arrow, and then select Stand by from the drop-down list.)

Allow the system	No action is required. The system	■ Power/standby
to initiate	initiates standby	lights blink.
standby.	■ After 10 minutes of inactivity	■ Screen is cleared.
	while running on battery power.
	■ After 25 minutes of inactivity
	while running on external power.
Resume from	■ Briefly press the power button.	■ Power/standby
standby.	– or –	lights are turned on.
	■ Open the notebook.†	■ Your work is
		returned to the
		screen.

*Depending on your network connections, the Turn Off Computer button may be called the Shut Down button.

†Depending on your notebook configuration, you may also be able to resume from standby by moving or activating a control on an optional mouse or by opening the display if the notebook was closed while in standby.

3–8 Hardware and Software Guide