1. Getting Started

Before using the camcorder, you must load the Lithium-ion rechargeable battery. 1. Slide the latch at the bottom to remove cover.

2. Insert the battery following to the correct polarity marks ( + or -).

3. Replace the battery cover.

To reduce risk of loosing your video and photos, be sure the camcorder is powered off before inserting and removing the SD memory card.

Insert the SD memory card as illustrated. Push down on the edge of the card until it "clicks" into position.

To remove the SD card, push down on the edge of the card until it "clicks". Allow the card to eject and remove it from the slot.

ENGLISH

Charge your battery

You must use the supplied AC adapter or USB cable.

You can charge your Camcorder whatever it is turned ON or OFF Please allow 3 to 5 hours by AC adapter, 5 to 9 hours by USB cable to recharge the battery.

Page 2
Image 2
HP V5020u manual Getting Started, Charge your battery