System Configuration menu
Select | To Do This | |
|
| |
Language Support | Change the Setup Utility language. | |
|
| |
Boot Options | Set the following boot options: | |
| ● f10 and f12 Delay (sec.)―Set the delay for the f10 and f12 functions | |
| of the Setup Utility in intervals of 5 seconds each (0, 5, 10, 15, 20). | |
| ● | |
| ● Floppy boot―Enable/disable boot from Floppy. | |
| ● Internal Network Adapter boot―Enable/disable boot from Internal | |
| Network Adapter. | |
| ● Boot Order―Set the boot order for: | |
| ◦ | USB Floppy |
| ◦ | ATAPI CD/DVD ROM Drive |
| ◦ | Hard drive |
| ◦ | USB Diskette on Key |
| ◦ | USB Hard drive |
| ◦ | Network adapter |
|
| |
Button Sound (select models only) | Enable/disable the Quick Launch Button tapping sound. | |
|
| |
Virtualization Technology | Enable/disable the processor Virtualization Technology. | |
|
| |
Processor C4 State | Enable/disable the processor C4 sleep state. | |
|
|
|
Diagnostics menu
Select | To Do This |
|
|
Hard Disk Self Test | Run a comprehensive |
| NOTE: On models with two hard drives, this menu option is called the |
| Primary Hard Disk Self Test. |
|
|
Secondary Hard Disk Self Test (select models | Run a comprehensive |
only) |
|
|
|
Memory Test | Run a diagnostic test on the system memory. |
|
|
6 Chapter 3 Setup Utility menus