Powering On the Projector
Follow these instructions to power on the projector:
1.Ensure that the power cord and signal cable are securely connected.
✎Make sure the projector is perpendicular to the projection screen.
2.Remove the lens cap 1 from the projector by pulling it straight out.
3.Turn on the Main power switch 2 on the back of the projector and allow the projector to warm up for one to two minutes.
✎When the projector has warmed up, the Compaq startup screen displays, and the LED on the STANDBY button 3 turns green.
MP1400 Microportable Projector |