HP Value MP1400 Introducing the On-ScreenMenu, Analog On-ScreenMenu Adjustments

Projector Buttons (Continued)

Symbol	Control	Function
3 −	Minus button	Selects and adjusts the on-screen menu functions.
4 +	Plus button	Selects and adjusts the on-screen menu functions.
5 R	Resync button	Automatically synchronizes the projector to track
		the input source.

IMPORTANT: To use standby mode, press the Standby button and, after a

6- to 10-second delay, the unit enters standby mode and the projector lamp turns off. A “Going to Standby” message appears on the screen for the duration of the 6- to 10-second delay. When the message disappears from the screen, there is a 45-second delay before the lamp can be turned back on. Wait 45 seconds to allow the lamp to cool before pressing the Standby button again.

Introducing the On-Screen Menu

The adjustments for screen settings are located in the on-screen menu and can be viewed in one of seven available languages.

Analog On-Screen Menu Adjustments

To display the Analog on-screen menu, press the Select button on the projector. The following table shows the functions at each level:

Analog Menu	Analog Menu Level 2	Analog Menu Level 3
Brightness	Adjustment scale
Contrast	Adjustment scale
Position	Horizontal Position	Adjustment scale
	Vertical Position	Adjustment scale
	Save and Return
	Cancel
Zoom	Zoom	Adjustment scale
	Panning Left-Right	Adjustment scale
	Panning Up-Down	Adjustment scale
	Save and Return
	Cancel
Keystone	Adjustment scale
Picture	Dark—Light
		Continued

2-2 MP1400 Microportable Projector