HP ProCurve W.14.03 2. Enable the (Optional) Access Privilege Option, Figure 5-3.Example Configuration for RADIUS Authentication

RADIUS Authentication and Accounting

Configuring the Switch for RADIUS Authentication

Note: The Webui access task shown in this figure is available only on the switches covered in this guide.

The switch now allows Telnet and SSH authentication only through

RADIUS.

Figure 5-3. Example Configuration for RADIUS Authentication

Note	If you configure the Login Primary method as local instead of radius (and local
	passwords are configured on the switch), then clients connected to your
	network can gain access to either the Operator or Manager level without
	encountering the RADIUS authentication specified for Enable Primary. Refer
	to “Local Authentication Process” on page 5-24.

2. Enable the (Optional) Access Privilege Option

In the default RADIUS operation, the switch automatically admits any authen­ ticated client to the Login (Operator) privilege level, even if the RADIUS server specifies Enable (Manager) access for that client. Thus, an authenticated user authorized for the Manager privilege level must authenticate again to change privilege levels. Using the optional login privilege-modecommand overrides

5-13