Back to Contents Page

Setup

Base and Tilt • Cables • Wall Mounting Arm

Base and Tilt

Attaching the Base • Removing the Base • Adjusting the Tilt

Attaching the Base

1Set the panel face-down on a flat, protected surface.

2Align the pedestal slots with the panel tabs and insert (A).

3Slide the pedestal to the right to lock it into place (B).

4Lift the panel and lower the pedestal onto the base

until the push tab locks.

WARNING: Be careful to avoid pinching or scraping fingers when attaching the base.

CAUTION: To prevent damage, avoid applying pressure to the panel front.