QuickSpecs

HP xw4600 Workstation

Technical Specifications

Thermal Alert (Requires HP Monitors the temperature state within the chassis. Three modes:

Client Manager Software)

NORMAL - normal temperature ranges

ALERTED - excessive temperatures are detected. Raises a flag so action can be taken to avoid shutdown or provide for a smoother system shutdown

SHUTDOWN - excessive temperatures are encountered. Automatically shuts down the computer without warning before hardware component damage occurs

Remote ROM Flash

Provides secure, fail-safe ROM image management from a central network console

Remote Wakeup

System administrators can power on, restart, and power off a client computer from a remote

 

location.

ACPI (Advanced

Configuration and Power

Management Interface)

SMBIOS

ROM revision levels

Allows the system to enter and resume from low power modes (sleep states)

Controls system power consumption, making it possible to place individual cards and peripherals

in a low-power or powered-off state without affecting other elements of the system

Supports ACPI 2.0 for full compatibility with 64-bit operating systems

System Management BIOS 2.5, previously known as DMI BIOS, for system management information

Identifies system ROM revision levels and reports in Computer Setup Utility (F10).

Version is stored in an industry standard memory location (SMBIOS) so that management SW applications can use and report this information

System board revision level

Allows management SW to read revision level of the system board

 

Revision level is digitally encoded into the HW and cannot be modified

Ownership Tag

A user-defined string stored in non-volatile memory that is displayed in the BIOS splash screen

Remote ROM Flash

Provides secure, fail-safe ROM image management from a central network console

Remote Wakeup/

System administrators can power on, restart, and power off a client computer from a remote

Remote Shutdown

location.

 

Enables cost-effective power consumption when the administrator needs to distribute software,

 

perform security management, or update the ROM.

ROM Based Setup (F10) and Start-up Diagnostics

Yes

Industry Standard

ACPI

ASF

ATAPI

BBS

BIOS 32-bit Services

CD Boot

EDD

EHCI

PCI

PCI Express

PMM

SATA

SMBIOS

SPD

Revision Supported by the BIOS

Advanced Configuration and Power Management Interface, Version 2.0

Alert Standard Format Specification, Version 2.0

ATAPI Removable Media Device BIOS Specification Version 1.0

BIOS Boot Specification v1.01

Standard BIOS 32-bit Service Directory Proposal

"El Torrito" Bootable CD-ROM Format Specification Version 1.0

Enhanced Disk Drive Specification Version 1.1

BIOS Enhanced Disk Drive Specification Version 3.0

Enhanced Host Controller Interface for Universal Serial Bus, Revision 1.0

PCI Local Bus Specification, Revision 2.3

PCI Power Management Specification, Revision 1.1

PCI Firmware Specification, Revision 3.0, Draft .7

PCI Express Base Specification, Revision 1.1

PCI Express Base Specification, Revision 2.0

POST Memory Manager Specification, Version 1.01

Serial ATA Specification, Revision 1.0a

Serial ATA 3 Gb/s: Extensions to Serial ATA 1.5 Gb/s, Revision 1.0

System Management BIOS Reference Specification, Version 2.5

PC SDRAM Serial Presence Detect (SPD) Specification, Revision 1.2B

 

 

 

 

 

DA - 12792 Worldwide — Version 1 — October 1, 2007

Page 20

Page 20
Image 20
HP xw4600 manual Industry Standard, Revision Supported by the Bios