![](/images/new-backgrounds/1152755/152755137x1.webp)
QuickSpecs
HP xw4600 Workstation
Technical Specifications - Monitors
Sleep1 | 2 watts |
Off | 0.05 watts |
Heat Dissipation2 | AC Input |
| Voltage at 100 |
| VAC +/- 5 |
| VAC, 50 Hz |
| +/- 3 Hz |
Normal Operation | 350.8 BTU/hr |
Sleep | 6.8 BTU/hr |
Off | 0.2 BTU/hr |
NOTES |
|
2watts 0.06 watts
AC Input Voltage at 115 VAC +/- 5 VAC, 60 Hz +/- 3 Hz
347.0BTU/hr
6.8BTU/hr
0.2BTU/hr
2watts 0.25 watts
AC Input Voltage at 230 VAC +/- 5 VAC, 50 Hz +/- 3 Hz
342.6BTU/hr
6.8BTU/hr
0.9BTU/hr
1This sleep status ignore the input sync signal check cycle when metering the model in sleep mode.
2Heat dissipation is calculated based on the measured watts, assuming the service level is attained for one hour.
Longevity and Upgrading Upgradeability features contained in the product include:
One upstream and four downstream USB ports
Ergonomics | The monitor meets the ergonomic requirement of |
| |
Additional Information | This product is in compliance with the Restrictions of |
| Hazardous Substances (RoHS) Directive, |
| 2002/95/EC. |
| This HP product is designed to comply with the |
| Waste Electrical and Electronic Equipment (WEEE) |
| Directive, 2002/96/EC. |
| This product is in compliance with California |
| Proposition 65 (State of California; Safe Drinking |
| Water and Toxic Enforcement Act of 1986). |
| This product is in compliance with the IEEE 1680 |
| (EPEAT) standard at the SILVER level, see |
| www.epeat.net. |
| Plastics parts weighing over 25 grams used in the |
| product are marked per ISO 11469 and ISO1043. |
| Display meets the requirement for low frequency |
| electromagnetic fields per |
| prEN50279 A/B/C. |
| This product contains 0% recycled materials (by wt.) |
| This product is 97.6% recycleable when properly |
| disposed of at end of life. |
| Packaging Materials |
| Corrugated Paper 2.19 kg |
| |
| EPS Molded Foam 1.07 kg |
DA - 12792 Worldwide — Version 1 — October 1, 2007 | Page 69 |