
QuickSpecs
HP Z400 Workstation
Technical Specifications - Hard Drives
Rotational Speed | 15,000 rpm |
Logical Blocks | 879, 097, 968 - 512 byte blocks |
Operating Temperature50° to 95° F (10° to 35° C)
SATA (Serial ATA) Hard160,041,885,696
Drives for HP bytes
Workstations (10K)
Capacity | 160,041,885,696 bytes | ||
Height | 1 in; 2.5 cm |
| |
Width | Media Diameter | 3.5 in; 8.9 cm | |
| Physical Size | 4 in; 10.2 cm | |
Interface | Serial ATA (1.5 Gb/s), Native Command Queuing | ||
| enabled |
| |
Synchronous Transfer Up to 150 MB/s |
| ||
Rate (Maximum) |
|
| |
Buffer | 16 Mbytes |
| |
Seek Time (typical | Single Track | 0.3 ms | |
reads, includes | Average | 4.6 ms | |
controller overhead, | |||
Full Stroke | 10.2 ms | ||
including settling) | |||
Rotational Speed | 10,000 rpm |
| |
Logical Blocks | 312,581,808 |
|
Operating Temperature41 to 131 F (5 to 55 C)
1,000,204,886,016Capacity | 1,000,204,886,016 bytes | ||
bytes | Height | 1 in; 2.5 cm |
|
(7,200) | Width | Media Diameter | 3.5 in; 8.9 cm |
| |||
|
| Physical Size | 4 in; 10.2 cm |
| Interface | Serial ATA (3.0 Gb/s), Native Command Queuing | |
|
| enabled |
|
| Synchronous Transfer Up to 300 MB/s |
| |
| Rate (Maximum) |
|
|
| Buffer | 32 MB |
|
| Seek Time (typical | Single Track | 2 ms |
| reads, includes | Average | 11 ms |
| controller overhead, | ||
| Full Stroke | 21 ms | |
| including settling) | ||
| Rotational Speed | 7,200 rpm |
|
| Logical Blocks | 1,953,525,168 |
|
Operating Temperature41 to 131 F (5 to 55 C)
500,107,862,016 | Capacity | 500,107,862,016 bytes | |
bytes | Height | 1 in; 2.5 cm |
|
(7,200) | Width | Media Diameter | 3.5 in; 8.9 cm |
| |||
|
| Physical Size | 4 in; 10.2 cm |
| Interface | Serial ATA (3.0 Gb/s), Native Command Queuing | |
|
| enabled |
|
DA - 13276 Worldwide QuickSpecs — Version 1 — 3.30.2009 | Page 29 |