QuickSpecs
HP Z600 Workstation
System Technical Specifications
Memory Configuration |
| Not all memory configurations possible are represented above. | |
(Supported) |
| Only ECC DIMMs are supported. | |
|
| Do not install memory modules into memory slots if corresponding processor is not | |
|
| installed. | |
|
| Dual processor configurations with memory modules installed for only one processor is not | |
|
| supported. | |
|
| UDIMM (Unbuffered) and RDIMM (Registered) memory cannot be mixed. All memory | |
|
| installed in the system must be either UDIMM or RDIMM. | |
PCI Express | 2 PCI Express x16 Gen2 graphics | ||
Connectors (Gen2 Rev | 1 PCI Express Gen2 (x8 mechanically, x4 electrically) | ||
0.7 connectors) | 1 PCI Express Gen1 (x8 mechanically, x4 electrically) | ||
PCI Connectors (5.0V) | 2 full length 33 MHz | ||
Interfaces Supported | SATA |
| Integrated |
|
|
| RAID 0, 1, 5, 10 and NCQ. (Factory integrated RAID is |
|
|
| Microsoft Windows only) |
Serial Attached SCSI | Requires Optional PCIe card | ||
Integrated RAID | Integrated SATA RAID | ||
|
| RAID 0, RAID 1*, RAID 5, RAID 10 | |
|
| Supports one RAID array with | |
|
| RAID 0 configuration – striped array (supported and configure to order) | |
|
| RAID 1 configuration – mirrored array (supported and configure to order) | |
|
| RAID 5 parity striping (supported but not configure to order) | |
|
| RAID 10 striped and mirrored array (supported but not configure to order) | |
| NOTES: *HW RAID functionality not supported by Linux. Use SW RAID functionality provided in | ||
| the Red Hat Operating system instead. | ||
Integrated Graphics | No |
|
|
|
|
|
|
|
|
|
| DA - 13277 Worldwide QuickSpecs — Version 23 — 12/1/2010 | Page 18 |
