QuickSpecs
HP Z600 Workstation
Technical Specifications - Hard Drives
Buffer | 16 MB |
Seek Time (typical | Single Track |
reads, includes controller Average | |
overhead, including | Full Stroke |
settling) | |
Rotational Speed | 10,000 rpm |
Logical Blocks | 586,072,368 |
Operating Temperature41 to 131 F (5 to 55 C)
0.7ms (maximum)
4.4ms
9.5ms
160GB SATA 10K rpm SFF in 3.5" Frame
HDD
Capacity | 160,041,885,696 bytes |
|
Height | 1 in; 2.5 cm |
|
Width | Media Diameter | 2.5 in; 6.36 cm |
| Physical Size | 4 in; 10.2 cm |
Interface | Serial ATA (1.5 Gb/s), Native Command Queuing enabled | |
Synchronous Transfer | Up to 300 MB/s |
|
Rate (Maximum) |
|
|
Buffer | 16 MB |
Seek Time (typical | Single Track |
reads, includes controller Average | |
overhead, including | Full Stroke |
settling) | |
Rotational Speed | 10,000 rpm |
Logical Blocks | 312,581,808 |
Operating Temperature41 to 131 F (5 to 55 C)
0.7ms (maximum)
4.4ms
9.5ms
2.0TB SATA Capacity | 2.0TB |
| ||
7200 rpm | Height | 1 in; 2.54 cm |
| |
3Gb/s 3.5" | Width | Media Diameter | 3.5 in; 8.9 cm | |
HDD | ||||
| Physical Size | 4.0 in; 10.17 cm | ||
|
| |||
| Interface | Serial ATA (3.0 Gb/s), Native Command Queuing Enabled | ||
| Synchronous Transfer | Up to 300MB/s |
| |
| Rate (Maximum) |
|
| |
| Buffer | 64MB |
| |
| Seek Time (typical | Single Track | 1.0 ms | |
| reads, includes controller Average | 10 ms | ||
| overhead, including | Full Stroke | Not Specified | |
| settling) | |||
| Rotational Speed | 7,200 rpm |
| |
| Logical Blocks | 3,907,029,168 |
| |
| Operating Temperature41° to 131° F (5° to 55° C) | |||
1.5TB SATA Capacity | 1.5TB |
| ||
7200 rpm | Height | 1 in; 2.54 cm |
| |
3Gb/s 3.5" | Width | Media Diameter | 3.5 in; 8.9 cm | |
HDD | ||||
| Physical Size | 4.0 in; 10.17 cm | ||
|
| |||
DA - 13277 Worldwide QuickSpecs — Version 23 — 12/1/2010 | Page 40 |
