Models ZR2240w, ZR2440w, and ZR2740w use the HP Quick Release 2 mechanism for easy moving of the monitor. To mount the panel onto the pedestal:

1.Slide the mounting plate on the pedestal under the upper lip of the recess in the back of the panel.

2.Lower the pedestal into the recess until it snaps into place.

3.The HP Quick Release 2 latch pops up when the monitor is locked in place.

Figure 2-2Mounting the Panel onto the HP Quick Release 2

Rear Components

ZR2040w Model

Figure 2-3ZR2040w Rear Components

Component

Function

 

 

 

1

AC Power Connector

Connects the AC power cord to the monitor.

 

 

 

2

Cable Lock Provision

Provides slot for use with cable security locks.

 

 

 

3

DisplayPort Connector

Connects the DisplayPort cable to the monitor.

 

 

 

4

DVI-D Connector

Connects the DVI-D cable to the monitor.

 

 

 

5

VGA Connector

Connects the VGA cable to the monitor.

 

 

 

6 Chapter 2 Setting Up the Monitor