ZR2440w Model

The default input on the ZR2440w is DisplayPort and the scan order is initially set to DisplayPort, DVI-D, HDMI. You can change the current input, the default and the scan order through the OSD. Pressing the + button on the front of the monitor will take you directly to the OSD source-control submenu.

Figure 3-2ZR2440w Front Panel Controls

Control

 

 

Function

 

 

 

 

1

 

Menu

Opens, selects or exits the OSD menu.

 

 

 

 

2

 

Minus

If the OSD menu is on, press to navigate backward through

 

 

 

the OSD menu and decrease adjustment levels.

 

 

 

 

3

 

Plus/source

If the OSD menu is on, press to navigate forward through

 

 

 

the OSD menu and increase adjustment levels.

 

 

 

If the OSD menu is inactive, press to activate the source

 

 

 

button that chooses the video signal input (VGA, DVI, or

 

 

 

DisplayPort).

 

 

 

 

4

OK

OK

If the OSD menu is on, press to select the highlighted

 

 

 

menu item.

 

 

 

 

5

 

Power

Turns the monitor on or off as long as the master power

 

 

 

switch on the rear panel is on.

 

 

 

 

6

 

Power LED

Blue = Fully powered.

 

 

 

Amber = Sleep mode.

 

 

 

Flashing Amber = Sleep Timer mode.

No light indicates power off, or normal operation if the LED is suppressed.

Overview of Operation 25

Page 31
Image 31
HP ZR2440w IPS manual 2ZR2440w Front Panel Controls