A Troubleshooting
Solving Common Problems
The following table lists possible problems, the possible cause of each problem, and the recommended solutions.
Problem | Possible Cause | Solution | |||
|
|
|
|
|
|
Screen is blank and no LED. | Power cord is disconnected. | Connect the power cord. | |||
|
|
|
|
|
|
| Master power switch is turned | Set the master power switch on the rear panel of the | |||
| off. | monitor to the On position and press the front panel | |||
|
| power button. | |||
|
|
|
|
|
|
| Power button on front panel of | Press the front panel power button. | |||
| the monitor is turned off. |
|
|
|
|
|
|
|
|
|
|
| Video cable is improperly | Connect the video cable properly. Refer to Setting | |||
| connected. |
|
|
|
|
| Up the Monitor on page 4 for more information. | ||||
|
|
|
|
|
|
| Screen blanking is active. | Press any key on the keyboard or move the mouse | |||
|
| to inactivate the screen blanking utility. | |||
|
|
| |||
Brightness is too high or low. | Brightness adjustment is not | Adjust the brightness setting using the – (Minus) and | |||
| set correctly. | + (Plus) buttons. | |||
|
|
|
|
|
|
ENWW | Solving Common Problems 19 |