HSM CMN3000R, CMN4000R manual Specifications, Electrical Design

T H E C O N T I N U O U S P O W E R C O M P A N Y

SPECIFICATIONS

ELECTRICAL

DESIGN

Input	CMN3000R/CMN4000R
Voltage	120V +10%, -20% (without
	Battery discharge)
Power Factor Corrected	IAW MIL STD. 1399 Sec. 300
Frequency	45 to 65Hz
Current(Amps) @ 120VAC	21A/28A @ 100% Non-Linear
Output
Voltage	120VAC ± 3%
Frequency	50Hz / 60Hz (software select)
	Line Sync (software select)
Current(Amps)	25A/33A @ 100% Non-Linear
Crest Factor Ratio	@50% Load	Up to 4.8:1
(Non-linear load and	@75% Load	Up to 3.2:1
less than 5% THD) Typical	@100% Load	Up to 2.4:1
Total Harmonic Distortion (THD)	3% Typ; 5% Max.

Standard Features

Specifications

MTBF

Power Factor Corrected, Digital Regenerative™ On-Line, Sinewave

Inverter Powers Load Continuously Extended Brownout Protection Designed for Non-linear Loads Continuous Operation on

-25%,+12% Line Automatic Bypass RS232 Data Interface Software Selectable Output

Frequency AC Output Switch

Auxiliary Battery Connector

Rear Mounted Ground Stud Optional SNMP Interface

UL 1778, CUL, FCC Class A, IEEE 587/ANSI C62.41, IEC 555 @ 120VAC

In Excess of 100,000 Hours

(@100% Non-linear load)

CONTROLS AND INDICATORS

Dynamic Response	±4% for 100% Step Load Change,
	0.5 Millisecond Recovery Time
Overload	110% for 10 Minutes;
	200% for 50 Milliseconds
Efficiency (UPS)	85-87% Typical
UPS Protection	Input and Output Short Circuit;
	Input and Output Overload;
	Excessive Battery Discharge
ENVIRONMENTAL
Operating Temperature	0oC to 40oC
Humidity	0% to 95% Non-condensing
Altitude	Sea Level to 10,000 Feet
Audible Noise	42 dBA at Five Feet
MECHANICAL
Input	CPC Type 3 Position Inlet
	Connectors

Visual Indicators

Sequenced LEDs

Single LED

Front Panel Controls

Audible Alarms

RS232 Data Interface (DB-9F)

Open Collector (DB-9F)

Optional SNMP Interface (RJ45 or BNC)

Battery Level, Load Level

AC Input, Inverter On, Load On Summary Alarm, Alarm Silence, Cold Start,

Power On, Cold Start Alarm Silence, Battery Test AC Output On/Off, Bypass

Utility Interrupt, Inverter Failure Overload, Low Battery

Full Interactive, Remote Computer Monitoring and Control of UPS Functions.

Compatible with Systems EnhancementTM UPS Monitor & Control Software

Allows Alarm Function Monitoring

Allows Full Control and Monitoring Over Network Connection.

Output (Qty.)	Load 1 and Load 2 (3 each)
	NEMA Type 5-20R
Cooling	Low Velocity, Temperature
	Controlled Reversible Forced
	Air
Dimensions: HxWXD In.	5.25 x 19 x 23
Weight: Lbs. (Kg)	85 (38.8)

Specifications subject to change without notice

Page 13