HTC HTCAmaze4GUnlockedBlack manual Disconnecting or unpairing from a Bluetooth device

183Bluetooth

4.Make sure that the headset is discoverable.

5.Tap Scan for devices. HTC Amaze 4G will start to scan for Bluetooth devices within range.

6.When you see the name of your headset displayed in the Bluetooth devices section, tap the name. HTC Amaze 4G then automatically tries to pair with the headset.

7.If automatic pairing fails, enter the passcode supplied with your headset.

The pairing and connection status is displayed below the hands-free headset or car kit name in the Bluetooth devices section. When the Bluetooth headset or car kit is connected to HTC Amaze 4G, the Bluetooth connected icon is displayed in the status bar. Depending on the type of headset or car kit you have connected, you can then start using the headset or car kit.

Reconnecting a headset or car kit

Normally, you can easily reconnect your headset by switching on Bluetooth on HTC Amaze 4G, and then turning on the headset. However, you might have to connect manually if your headset has been used with another Bluetooth device.

1.From the Home screen, press , and then tap Settings > Wireless & networks.

2.Tap Bluetooth settings.

3.If the Bluetooth check box is not selected, select it to turn Bluetooth on.

4.Make sure that the headset is discoverable.

5.Tap the headset’s name in the Bluetooth devices section.

6.If prompted to enter a passcode, try 0000 or 1234, or consult the headset/car kit documentation to find the passcode.

If you still cannot reconnect to the headset or car kit, follow the instructions in Unpairing from a Bluetooth device on page 184, and then follow the steps under Connecting a Bluetooth headset or car kit on page 182.

Disconnecting or unpairing from a Bluetooth device

Disconnecting a Bluetooth device

1.From the Home screen, press , and then tap Settings > Wireless & networks.

2.Tap Bluetooth settings.

3.In the Bluetooth devices section, press and hold the device to disconnect.

4.Tap Disconnect.