HTC NIKI160 To automatically detect the network operator, To manually select the network operator

Getting Connected 151

10.2 Connection Setup

Connection Setup configures your device’s data connections, such as GPRS, WAP, and MMS, for you so that you do not need to enter the settings manually onto your device. All you need to do is to select your network operator, then Connection Setup does all the configuration for you.

To automatically detect the network operator

The first time you power on your device, or when you insert a new SIM card and then power on your device, Connection Setup will display a notification message to inform you that it will automatically configure your device.

1.Tap Yes on the notification message.

Note If your SIM card supports multiple network operator profiles, the next message that appears will display network profile choices. Select the profile you want to use and tap OK.

2.Next, you will be asked if you want to automatically configure your device to the proper network settings. Tap Yes.

Connection Setup then configures your device’s data connection settings.

3.After the Connection Setup completes the configuration, tap Restart.

To manually select the network operator

You can also manually select your network operator from Connection Setup’s settings screen. Connection Setup will then reconfigure your device’s data connections settings based on the operator that you selected.

1.Tap Start > Settings > Connections tab> Connection Setup.

2.Select the network Country and Operator you want to use.