HTC Surround manual Taking a photo, Capturing a video

Models: Surround

1 79
Download 79 pages 60.75 Kb
Page 50
Image 50

50Camera

Taking a photo

1.On the Start screen, tap  .

2.Tap Camera.

3.Before taking the photo, you can zoom in first on your subject. See “Zooming” to find out how.

4.Tap  , and then select a camera flash mode depending on your lighting conditions.

5.Frame your subject on the Viewfinder screen.

6.Press CAMERA to take the photo.

7.Choose what you want to do with the photo you’ve just taken. See “After capturing“ for details.

Camera flash doesn’t turn on?

Using the flash eats up much battery power. To save battery power, the camera disables the flash (even when you have set the camera flash mode to Auto flash or Flash on) when one of the following occurs:

You have an incoming call

The flash will be disabled temporarily when you have an incoming call. After the call ends, you’ll be able to use the flash again.

If you have set the flash to Flash on, it turns back on after you answer and end the call.

Your phone’s battery level reaches 10% or lower

Recharge the battery so that the camera can have enough battery power to use the flash.

Cold weather may lower battery performance which affects the flash

To make sure the camera has enough battery life to power up the flash, keep your phone warm. When not in use, put the phone inside your jacket to keep it warm, and try to avoid sudden temperature changes that may affect battery performance.

Capturing a video

1.

On the Start screen, tap

 .

 

2.

Tap Camera.

 

 

3.

On the Viewfinder screen, tap

to switch to video mode.

4.Before you start capturing, you can zoom in first on your subject. See “Zooming” to learn how.

5.Tap and then choose whether to turn the flashlight on or off while capturing video.

6.Frame your subject on the screen.

Page 50
Image 50
HTC Surround manual Taking a photo, Capturing a video