2.Click Settings, and then select New to create a new profile.
3.Enter the relative setting information and save the profile, click OK.
4.Click Connect to dial up. After the login completes, you can access the Internet.
Note:
yThe profile information varies with networks. For details, consult your service provider.
yThe connection rate shown after the
Security
You can change the settings related to the device security. Select Settings > Security, and then select the following security setting items.
Reset
This option is used to reset user configurations of the device settings to the factory settings.
Password Lock
This option is used to enable or disable Phone lock and PIN lock.
Change Password
1.Select Security > Change password.
2.Select one item.
3.Enter the old password (The initial phone password is 0000).
4.Enter a new password.
5.Enter the new password again to confirm.
Note:
yTo modify the PIN code, you must set PIN lock to On firstly.
yIf you enter the wrong PIN or PIN2 for three times, the SIM card is locked. You need the PUK or PUK2 code to unlock the SIM card. If you enter the wrong PUK or PUK2 code for 10 times in total, the SIM card is locked permanently.
yThe PUK or PUK2 code is delivered with the SIM card. If you do not receive the code or forget it, contact your service provider.
Warnings and Precautions
This section contains important information pertaining to the operating instructions of your device. It also contains information about how to use the device safely. Read this information carefully before using your device.
Electronic Device
Power off your device if using the device is prohibited. Do not use the device when using the device causes danger or interference with electronic devices.
8
