![SURFACE TEMPERATURE HIGH LIMIT CUT-OFF (if supplied)](/images/new-backgrounds/49415/4941535x1.webp)
SURFACE TEMPERATURE HIGH LIMIT CUT-OFF (if supplied)
1.Disconnect power from unit.
2.Remove access cover.
3.Disconnect the four (4) 14 gauge wires or three (3) 14 gauge wires and a jumper, as required.
Control Wires
4.Remove the two (2) mounting screws or disconnect from thermostat, as required.
Mounting Screws ![2.Remove access cover.](/images/new-backgrounds/49415/4941535xi2.webp)
5.Replace control and install new high limit switch by performing above steps in reverse order.
18