3.Assemble the quick release mechanism to the front wheel:
-Remove the adjusting nut [4] and one spring from the quick release mechanism
-Put the quick release mechanism through the front wheel hub
-Put the spring and adjusting nut back on the quick release mechanism
-Do not tighten the adjusting nut at this time.
4.Assemble the front wheel to the fork:
NOTE: The words “open” and “close” are on opposite sides of the quick release lever.
-Move the quick release lever [1] to the “open” position [2] so the word “open” is pointing away from the wheel
-Put the wheel between the fork legs [3]. Make sure the axle is against the bottom of the slot in each fork leg.
