Huffy DC177 manual Pole Sections Should have a

3.Align top holes of top pole to bottom holes of bottom pole. While maintaining alignment, bounce top and middle pole assembly (1 & 2) onto lower section (3) using a wood scrap as shown until they no longer move toward pole identification mark on bottom pole (3).

IMPORTANT!:

Holes in top (1) and bottom pole (3) sections MUST align to correctly position elevator system toward playing surface.

1

Taped Reference

Mark

2

NOTE:
POLE SECTIONS
SHOULD HAVE A
3-1/2" (9 CM) MINIMUM	3
OVERLAP.

RODS SHOWN ARE

FOR VISUAL

REPRESENTATION

OF ALIGNMENT

AND ARE NOT

SUPPLIED WITH THE HARDWARE

WOOD SCRAP

(NOT SUPPLIED)

P/N 211475 01/04 10