SECTION H: TROUBLESHOOTING GUIDE
1.If the elevator is still difficult to operate, verify that the valve located on the strut is fully depressed when the trigger is activated.
WARNING!
59
IMPORTANT!:
TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.
Pin must be fully
depressed so that the backboard assembly can move freely
2.To allow easy movement, or if system does not lock when the trigger is released, two adjustments can be made.
A.
Slide shroud back to expose bracket and cable.
•If the system does not move freely, loosen nuts and adjust cable toward gas strut.
•If the system does not lock when the trigger is released, adjust cable away from gas strut.
Tighten nuts and slide shroud back into position.
B.
Remove right handle to allow access to trigger and cable mechanism.
•If system is not moving freely, loosen nuts and adjust cable away from trigger.
•If the system does not lock when the trigger is released, adjust cable toward trigger.
Reconnect right handle.
Lock Unlock
Lock Unlock
35 | 05/03 | P/N 211689C |
