SECTION A: ASSEMBLE THE POLES
1.Correctly identify each pole section. Mark pole sections with tape as shown.
2
5" 
TAPE
(13 cm)
1
3
5" 
TAPE
(13 cm)
2.Bounce middle pole section (2) into top pole section (1) together using a wood scrap as shown until they no longer move toward taped reference mark.
NOTE: Pole sections should have a
2
1
IMPORTANT!:
Position middle pole so that the warning label is on the same side as the 1/2" (cm) diameter holes of the top pole.
Wood Scrap
9 | 05/03 | P/N 211689C |
