4. Install rod (7) through holes in bottom pole section (6) and eyebolt (8).
8 
6
7
5. Install wheel axle (2) through wheel carriage (19) and install wheels (3) onto wheel axle (2) with spacers (17) as shown. Insert pole assembly into tank assembly as shown. Secure bottom pole (6) section to tank and wheel carriage as shown. A deep socket is recommended.
6 |
| 1 |
WARNING! | 7 |
TWO PEOPLE REQUIRED | |
FOR THIS PROCEDURE. |
|
FAILURE TO FOLLOW THIS | 8 |
WARNING COULD RESULT | |
IN SERIOUS INJURY AND/OR |
|
PROPERTY DAMAGE. |
|
17
3
2
19 |
17
3
9 |
IMPORTANT!
IMPORTANT! |
DO NOT OVER |
TIGHTEN |
THE SPACER (17) WILL
FIT LOOSELY UNTIL
SECURED INTO THE
CAVITY OF THE BASE.
11 | 2/05 | P/N 211017 |
