Audio-Technica AT-PL120 Specifications†, Turntable Specifications, Cartridge Specifications ATP-2

Specifications†

Turntable Specifications

Type	3-Speed, fully manual operation
Motor	DC motor
Drive Method	Direct drive
Speeds	33-1/3 RPM, 45 RPM, 78 RPM
Pitch Variation	+/- 10% or +/- 20%
Turntable Platter	Die-cast aluminum
Starting Torque	>1.6 kgm-cm
Braking System	Electronic brake
Wow and Flutter	< 0.2% WRMS (33 RPM)
Signal-to-Noise Ratio	> 50 dB
Output Level
Pre-amp “Off”	2.5 mV nominal at 1 KHz, 5 cm/sec
Pre-amp “On”	200 mV nominal at 1 KHz, 5 cm/sec
Phono Pre-amp Gain	38 dB nominal, RIAA equalized
Pitch Output	Output signal to drive remote pitch indicator
	2.5V square wave signal
	675 Hz +/- 1 Hz for 33 and 45 RPM quartz
	locked speeds
	Varies from 540 Hz	- 810 Hz when +/- 20%
	pitch is selected
	Varies from 607 Hz	- 742 Hz when +/- 10%
	pitch is selected
	1170 +/- 1 Hz for 78 RPM
Remote Start/Stop	2 conductor 1/4" connector (T/S)
	Normally open contact closure
Power Supply Requirements	115/230V AC, 50/60 Hz
Power Consumption	13W
Dimensions	17 3/4" (450 mm) W x 13 7/8" (352 mm) D
	x 6" (157 mm) H
Weight	23.4 lb (10.6 kg)
Accessories Included	Headshell/cartridge (ATP-2)
	AC line cord
	45 RPM adapter
	Operation manual

Cartridge Specifications (ATP-2)

Frequency Response	15-22,000 Hz
Channel Separation	23/17 (dB at 1 kHz/10 kHz)
Vertical Tracking Force	3.0 – 5.0 grams
Stylus Construction	Bonded round shank
Output	5.3 mV at 1 kHz, 5 cm/sec
Channel Balance	1.5 dB
Stylus Shape	0.4 x 0.7 mil elliptical
Cantilever	Alloy tube
Mount	Half-inch

† Specifications are subject to change without notice.

10