Huffy In-Ground Basketball manual Before YOU Start

BEFORE YOU START

To ensure optimal playability of backboard system, a close tolerance fit between the elevator components and hardware is required. Test-fit large bolts into large holes of elevator tubes, backboard brackets, and triangle plates. Carefully rock them in a circular motion to ream out any excess paint from holes if necessary.

NOTE: Not all items pictured are included with every model.

HEIGHT

ADJUSTMENT

Rotate crank handle to raise and lower backboard.

Do not over crank
handle beyond the
manufactured height
indicator range of	A
7-1/2 - 10 feet.
Damage may be
caused to the screw	B
jack’s internal
adjustment
mechanism if
adjusted over 10 or
under 7-1/2 feet.

MOVING SYSTEM

1.While holding pole, rotate basketball sytem forward until wheels engage with ground.

33

2.Move basketball system to desired location.

3.Carefully rotate basketball system upright.

4.Check system for stability.

2

3

1

568090 11/06

NOTICE TO ASSEMBLERS

Adult Assembly Required. Dispose of ALL packaging materials promptly. As with all products, periodically inspect

for loose small parts.

Assembled unit MUST be filled with sand or water at ALL times.

ALL basketball systems, including those used for DISPLAYS, MUST be assembled and installed according to instructions. Failure to follow instructions could result in SERIOUS INJURY. It is NOT acceptable to devise a makeshift support system.

ID# M6809011 12/06 2