2. Correctly identify each pole section. Poles have an identification sticker that will be used as a reference point in the next step.
MIDDLE
5
IDENTIFICATION STICKER
IDENTIFICATION STICKER
4
TOP
BOTTOM
6
3. Bounce middle pole section (5) into top section (4) using a wood scrap as shown until the top pole no longer moves toward the pole identification sticker on the middle pole.
5
CAUTION!
THE IDENTIFICATION STICKER IS LOCATED 5" FROM THE END OF THE POLE. WHEN PROPERLY POUNDED TOGETHER, THE POLE SECTIONS SHOULD HAVE A
BETWEEN THE OVERLAPPING POLE AND THE IDENTIFICATION STICKER.
IMPORTANT! |
NOTE ORIENTATION OF |
POLES. |
4
Wood Scrap (not supplied)
9 | 12/06 | ID# M6809011 |
