![](/images/new-backgrounds/1298381/29838127x1.webp)
2. Identify elevator tubes (38).
38
Toward Board
Toward Pole
Elevator Tubes
3. Assemble elevator tubes (38) to ratchet
(28)and backboard brackets (29) using bolts (36), spacers (17, 20, and 23), and nuts (39) as shown. Tighten completely.
27
LEVER
BROOM HANDLE
IMPORTANT!
It is necessary for all parts to be installed properly for this mechanism to work safely and properly.
29
20
23
36 | 17 |
39
23
39
38
17
28
36
38
IMPORTANT!
Test fit bolts into holes of backboard brackets (29) and carefully rock them in a circular motion to ream out paint from holes if necessary.
ID# M730131 | 11/05 | 14 |