Huffy M730131 manual Align dimple of top pole into trough of middle pole as shown

2. While maintaining alignment, bounce middle pole section (5) into top section (4) using a wood scrap as shown until the top pole no longer moves toward the pole identification sticker on the middle pole.

CAUTION!

THE IDENTIFICATION STICKER IS LOCATED 5" FROM THE END OF THE POLE. WHEN PROPERLY POUNDED TOGETHER, THE POLE SECTIONS SHOULD HAVE A

3-1/2" MINIMUM OVERLAP, LEAVING 1-1/2" BETWEEN THE OVERLAPPING POLE AND THE IDENTIFICATION STICKER.

5

4

IMPORTANT!

Align dimple of top pole section (4) into trough of middle pole section (5) as shown.

5

pole middle

Trough

5”

(12.7 cm)

4

Dimple

5
	pole middle
ID Sticker	1.5”
	(3.81 cm)

4

Dimple

HOLE

Wood Scrap (NOT SUPPLIED)

9 11/05 ID# M730131