Hughes & Kettner ATS SIXTY Thf Cl Fan Channel, Turf Overdrive Channe, 2VOLUME, 4CHANNEL SELECT

THF CL FAN CHANNEL:

The CLEAN channel on the ATS Sixty is constructed using solid state (transistor) technology. This allows modern, sparkling clean sounds to be produced, like those featured on many contemporary recordings. The traditional 3-band equalisation section with passive tone controls also makes it possible to produce valve-like clean sounds using the “SOFT CLICK” circuitry.

(2)VOLUME:

Volume adjusts the amplification level of the clean channel. Turned to position 8-9 you can achieve the crunchy “Soft Click” Sound. With pickups delivering more output (humbuckers) this effect appears at lower volume settings (5-6)

(3)BASS / MID /TREBLE:

The center frequency and bandwidth for each of this three controls has been carefully selected to enable you to obtain a broad range of classic and modern clean sounds. Start with a standard setting (all controls in 12‘0 clock position) and change it as you want (f.e. more TREBLE for more harmonic overtones and sparkling clean sounds).

(4)CHANNEL SELECT:

Switches the input signal either to the CLEAN or the OVERDRIVE channel. The OVERDRIVE channel is active when the LED right of the channel select switch is on.

T I P : A n y conventional footswitch can be used to change between CLEAN and

T U B E O V E R D R I V E channels on the Sixty by c o n n e c t i n g i t t o t h e FOOTSWITCH socket on the rear panel.

TURF OVERDRIVE CHANNE

The Overdrive channel on the ATS Sixty consists of a genuine valve circuit (ECC 83). Valves produce a considerably better sound when overdriven than transistors. The contour of the harmonic distortion and the distinctive compression effect are the reasons why the authentic warm valve sound is sought after. However, valves do have a couple of drawbacks!

2