b18 0618
G&Ill VOICE BITE VOLUMEREVERB MISTER
(33 | (6) | 0 | (8) | (9) | (10) |
MASTERSFCTION:
An Accutronics spring unit is used to generate the reverb effect in the ATS Sixty. The quality of a reverb is largely dependent on the lenght and number of springs used: the unit used in the Sixty contains three particulary long springs which make the Sixty‘s effect deep and natural sounding.
Clean sounds require more reverb to produce the same special impression as corresponding overdriven sounds. Distortion sounds, on the other hand, are sensitive to reverb: too much effect swamps them and makes them unclear. For these reasons, the reverb unit is tuned differently for each of the two channels; no change is required when swapping channels.
(9)REVERB:
The reverb control determines the amount of reverb applied to the CLEAN and OVERDRIVE channel.
(10)MASTER:
Master sets the power to the amp on or off. (“on” is indicated by the red LED).
(11)MAINS:
Switches the power to the amp On or Off. ( “on” is indicated by the red LED ).
THF RFAR PANEL OF THE ATS SIXTY
VOLTAGE SELECTOR SWITCH:
European model: 220 - 240 V / USA /Japanese model: 110 - 120 V
HEADPHONES:
Socket for headphonesignal passes a special filter circuitry which adds the destinctive guitar cab sound characteristic.
FUSE: Mains Fuse 625 mA
4
